Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 83)

L-force | PLC Designer
We Write a Little Program

DMS 3.2 EN 02/2011 TD29 81
Finally the network should look like shown in the follwoing:
Function block TRAFFICSIGNAL, instruction part
In order to insert an operator in front of another operator, you must select the place
where the input to which you want to attach the operator feeds into the box.
Then use the command 'Insert' 'Box'. Otherwise you can set up these networks in the
same way as the first network.
Now our first POU has been finished. TRAFFICSIGNAL, according to the input of the
value STATUS, controls whichever light color we wish.