Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 727)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 725
20.6.19 Table
As soon as a table is inserted for the purpose of visualization of an array, the dialog
Configure Table will be opened. Besides the categories 'Tooltip' and 'Security' which
are also available for other visualization elements, the following categories will be
available for configuring display and contents of the table:
Category Table:
Dialog for the configuration of a Table, Category Table
Do the following table settings:
• Data array: Insert the name of an array which should be visualized in the table. It
is recommended to use the input assistant (<F2>) resp. the Intellisense function.
• Slider size: Insert here the desired height of the slider which will appear at the
bottom of the table element if the display of the array columns exceeds the
element width.
• Column header, Line header: Activate these options if you want to get displayed
the titles in the table. The line title reflects the array index (first column of the
table), the column title can be defined in category 'Columns'.