Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 182)

L-force | PLC Designer
The Individual Components
180 DMS 3.2 EN 02/2011 TD29

The dialog 'History of <data base project name>' will open. It shows the actions
(create, check in, label) which have been performed for the particular objects of the
project in a chronological order. The total number of objects is displayed behind
Version history. The dialog can be handled like described for command 'Show Version
History', but regard the following:
• The command 'Reset Version' is only available for single objects.
• The command 'Get latest version' means that all objects of the version of the
currently marked object will be called to the local project ! That means, that the
objects in »PLC Designer« will be overwritten with the older version. But: Local
objects, which were not yet part of the project in that older version, will not be
removed from the local project ! If a labeled version is called, which contains
Shared Objects, then the user will get a dialog where he can decide whether those
Shared Objects should be called also or not.
Label Version
Command 'Project' 'Data Base Link' 'Label Version'
This command is used to put a "label" on the actual version of each object of a project,
so that exactly this project version can be recalled later. A dialog 'Label <data base
project name>' will open. Insert a label name (Label) (e.g. "Release Version") and
optionally a Comment. When you confirm with OK, the dialog will close and the label
and the action "labeled with <label name>" will appear in the table of the version
history, as well in the history for a single object as in the history of the project. Shared
Objects which are part of the project will also get that label. A labeled version of the
project does not get a version number, but is just marked with a label icon in the
column 'Version'. If the option 'Labels only' is activated in the Version History dialog,
then only labeled versions will be listed.
Dialog 'Label project <data base project name>'