Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 433)

L-force | PLC Designer
The Resources

DMS 3.2 EN 02/2011 TD29 431
The files which get installed with a TSP are read when »PLC Designer« is started. The
target settings which are done in the PLC Designer dialogs will be saved with the
project.
Note!
If you use a new target file or if you have changed the existing one, PLC Designer
has to be restarted to read the updated version.
8.10.2 Dialog Target Settings
The dialog Target Settings will open automatically, when a new project is created. It
also can be opened by selecting the menu item 'Target Settings' in the register
'Resources' in the Object Organizer.
Choose one of the target configurations offered at Configuration.
If no Target Support Package has been installed, only 'None' can be selected, which
means working in simulation mode. If you choose one of the installed configurations
it depends on the entries in the target files, which possibilities are left to customize
this configuration in the PLC Designer dialogs. If you choose a target configuration, for
which there exists no valid licence on the computer, PLC Designer asks you to choose
another target.
If a configuration is selected, which is provided with the entry "HideSettings" in the
corresponding target file, you only can see the name of the configuration. Otherwise
there are four dialogs available to modify the given configuration:
• Target Platform
• Memory Layout
• General
• Network functionality
• Visualization

Stop!
Please be aware, that each modification of the predefined target configuration can
cause severe changes in performance and behaviour of the target !
Press <Default> if you want to reset the target settings to the standard configuration
given by the target file.