Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 142)

L-force | PLC Designer
The Individual Components
140 DMS 3.2 EN 02/2011 TD29

To add a Readme file to the archive zip, press the button Comment. A text editor will
open, where you can enter any text. If you close the dialog with OK, during creation of
the zip file a readme.txt file will be added. Additionally to the entered comments it
will contain information about the build date and version of PLC Designer.
If all desired selections have been made, in the main dialog press
• Save... to create and save the archive zip file: The standard dialog for saving a file
will open and you can enter the path, where the zip should be stored. The zip file
per default is named <projectname>.zip. Confirm with Save to start building it.
During creation the current progress status is displayed and the subsequent steps
are listed in the message window. There also a message will be displayed if any
file could not not been found.
• Mail… to create a temporary archive zip and to automatically generate an empty
email which contains the zip as an attachment. This feature only works if the MAPI
(Messaging Application Programming Interface) has been installed correctly on the
system, otherwise an error message is generated. During setup of the email the
progressing status is displayed and the steps of the action are listed in the
message window. The temporary zip file will be removed automatically after the
action has been finished.
• Cancel to cancel the action; no zip file will be generated.
Note!
After unpacking the archive zip on a different system it might be necessary to adapt
the file paths !