Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 115)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 113
The Target area just displays the directories for libraries and configuration files set in
the target system, e.g. through entries in the Target file. These fields cannot be edited,
but an entry can be selected and copied (right mouse button context menu).
»PLC Designer« generally searches first in the directories entered in 'Project', then in
those in 'Target' (defined in the Target file), and finally those listed under 'Common'. If
two files with identical names are found, the one in the directory that is browsed first
will be used.
Note!
The settings for area Common will be stored in »PLC Designer«, those for area
Project in the project..
6.2.7 Options for Log
If you choose this category in the Options dialog box, then you get the following
dialog box:
Option dialogue for the category Log
In this dialog, you can configure a file that acts as a project log, recording all user
actions and internal processes during Online mode processing (see also: Log).
If an existing project is opened for which no log has yet been generated, a dialog box
opens which calls attention to the fact that a log is now being set up that will receive
its first input after the next login process.