Window' 'log, L-force | plc designer – Lenze PLC Designer PLC Designer (R2-x) User Manual
Page 409
Advertising
L-force | PLC Designer
The Resources
DMS 3.2 EN 02/2011 TD29
407
8.6.1
'Window' 'Log'
To open, select the menu item 'Window' 'Log' or select entry 'Log' in the Resources tab.
Log window
In the log window, the filename of the currently displayed log appears after Log:. If
this is the log of the current project, the word "(Internal)" will be displayed.
Registered entries are displayed in the log window. The newest entry always appears
at the bottom.
Only actions belonging to categories that have been activated in the 'Filter' field of the
menu 'Project' 'Options' 'Log' will be displayed.
Available information concerning the currently selected entry is displayed below the
log window:
Advertising