Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 198)

L-force | PLC Designer
The Individual Components
196 DMS 3.2 EN 02/2011 TD29

If the command 'Data Base Link' in the 'Project' menu is activated, then additional
menu items will be available, which concern all objects of the project:
• Multiple Define
• Get All Latest Versions
• Multiple Check Out
• Multiple Check In
• Multiple Undo Check Out
• Project Version History
• Label Version
• Add Shared Objects
• Refresh Status
How the status of an object resp. its handling in the data base is displayed in the
Object Organizer :
Grey shaded icon: Object is stored in the data base (source control)
Green check in front of the object name: Object is checked out in the currently opened
project.
Red cross in front of the object name: Object is currently checked out by another user.
<R> behind object name: The object can only be read, but not edited.
Please regard: some objects (Task configuration, Sampling Trace, PLC Configuration,
Target Settings, Watch and Receipt Manager) are per default assigned with a <R> as
long as they are not checked out. This means that you will not automatically be asked
whether the object should be checked out, as soon as you start to edit the object; it
not necessarily means that you cannot edit the object. If there is no write access then
the command 'Check out' will not be available.