Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 192)

L-force | PLC Designer
The Individual Components
190 DMS 3.2 EN 02/2011 TD29

Visualization:
In the tab 'Visualization' you can define for the visualization object, how it should
be used (see also: CoDeSys Visualization User Manual):
Use as: If in the target settings the option 'Web-Visualization' resp. 'Target-
Visualization' is activated, then you can choose here whether the object should be
part of the Web-Visualization resp. Target--Visualization.
Used as: Activate one of these settings referring to the possibility of using "Master
layouts":
Visualization: The object is used as a normal visualization.
Visualization without master layout: If a Master Layout is defined in the project, it
will not be applied to this visualization object.
Master layout: The object will be used as Master Layout. Per default the master
layout always will be in the foreground of a visualization, except the option as
background is activated.
Properties Dialog, Visualization
Database-connection:
If the project is connected to an ENI data base (see 'Project' 'Options' 'Project
source control'), then a tab 'Database-connection' will be available. Here you can
display and modify the current assignment of the object to one of the data base
categories resp. to the category 'Local'. See for further information: 'What is ENI ' .