Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 320)

L-force | PLC Designer
Editors in PLC Designer
318 DMS 3.2 EN 02/2011 TD29

'Extras' 'Zoom Action/Transition'
Shortcut: <Alt>+<Enter>
The action of the first step of the marked block or the transition body of the first
transition of the market block is loaded into the editor in the respective language, in
which it has been written. If the action or the transition body is empty, then the
language must be selected, in which it has been written.
Regard that the transition condition which is written within the editor window will
take precedence over a condition which might be written directly at the transition
mark. Example: If here i>100, then the transition condition will be FALSE, although
TRUE has been entered at the mark!
'Extras' 'Clear Action/Transition'
With this command you can delete the actions of the first step of the marked block or
of the transitions body of the first transition.
If, during a step, you implement either only the action, the entry-action, or the exit-
action, then the same will be deleted by the command. Otherwise a dialog box
appears, and you can select which action or actions are to be deleted.
If the cursor is located in the action of an IEC step, then only this association will be
deleted. If an IEC step with an associated action is selected, then this association will
be deleted. During an IEC step with several actions, a selection dialog box will appear.