Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 114)

L-force | PLC Designer
The Individual Components
112 DMS 3.2 EN 02/2011 TD29

6.2.6 Options for Directories
If you choose this category in the Options dialog box, then you get the following
dialog box:
Options dialog box of the category Directories
Directories can be entered in the Project and Common areas for »PLC Designer« to use
in searching for Libraries, controller Configuration and Visualization files (bitmaps,
XML-files for dynamic texts etc.) iles, as well as for storing Compile and source-Upload
files. (Compile files for example are map- and list-files, not however e.g. symbol files !
The latter will be saved in the project directory.) If you activate the button (...) behind a
field, the directory selection dialog opens. For library and configuration files, several
paths can be entered for each, separated by semicolons ";".
Note!
Library paths can be entered based on the project file's path by prefixing a dot ".". If
e.g. ".\libs" is entered, the libraries will be searched in 'C:\programs\projects\libs', if
the current project is in 'C:\programs\projects'. For information on library paths see
also: 'Insert' 'Additional Library'.Chapter Library Manager, 'Insert' 'Additional Library'.
Do not use empty spaces and special characters except for "_" in the directory
pathes.