Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 186)

L-force | PLC Designer
The Individual Components
184 DMS 3.2 EN 02/2011 TD29

6.4.4 'Expand nodes' 'Collapse nodes'
With the command expand the objects are visibly unfolded which are located in the
selected object. With Collapse the subordinated objects are no longer shown.
With folders you can open or close them with a double mouse click or by pressing
<Enter>.
The context menu of the Object Organizer which contains this command appears
when an object or the object type has been selected and you have pressed the right
mouse button or <Shift>+<F10>.
6.4.5 'Project' 'Object Delete'
Shortcut: <Delete>
With this command the currently selected object (a POU, a data type, a visualization,
or global variables), or a folder with the subordinated objects is removed from the
Object Organizer and is thus deleted from the project. Deleting of an object can be
reversed by the command 'Edit' 'Undo'.
You can get back the deleted objects by using the command 'Edit' 'Undo'.
If the editor window of the object was open, then it is automatically closed.
If you delete with the command 'Edit' 'Cut', then the object is parked on the clipboard.
6.4.6 'Project' 'Object Add'
Shortcut: <Insert>
With this command you create a new object. The type of the object (POU, data type,
visualization, or global variables) depends upon the selected register card in the
Object Organizer. Regard that in doing so possibly a template will be used for objects
of type 'Global Variables', 'Data types', 'Function', 'Function Block' or 'Program' ., see
below, chapter 'Save as template'.
Enter the Name of the new POU in the dialog box which appears. Remember that the
name of the object may not have already been used.