Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 762)

L-force | PLC Designer
PLC Designer Visualization
760 DMS 3.2 EN 02/2011 TD29

The record is running from the left to the right; the latest value is shown on the
leftmost position; every 200 milliseconds the current value will be added to the
display. The arrow buttons in the symbol bars allow shifting the displayed time range.
Using the simple arrow buttons you can shift step by step, using the double arrows
you get to the end resp. start of the record. For example: if you go to the start of the
record by pressing the double arrows pointing to the left, you get a still display of the
former values. If you then move the marker (grey triangle in the upper left corner)
along the time axis, you can read the exact values of each of the both recorded
variables for each time in the rectangle elements below the diagram.
20.6.27 Visualization
When you insert a visualization as an element in another visualization, you are
creating a "reference" of the visualization.
The configuration of this reference can be done in the Visualization category within
the visualization element configuration dialog box.
Visualization Element Configuration Dialog Box ( Visualization Category)
Enter the object name for the visualization, which should be inserted, in the
Visualization field. Use the ... button to open a dialog box containing the
visualizations available in this project. Any visualization may be used with the
exception of the current one.
The possible settings concerning the visualization frame are the same as described for
a bitmap (see above).