Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 759)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 757
Enter a project variable in column Variable (mouse-click on the field will open
an edit frame). It is recommended to use the input assistant <F2> or
Intellisense function.
Color and Line type for the display of the variable in the record you can define
by a mouse-click on the corresponding field in column Color (the standard
dialog or a target-specific color selection list) resp. by selecting a line type in
the corresponding field of column Line type (normal ___, dashed _ _ _, dotted
....., dashdotted _ . _ .).
In column Marker you can define a variable, which will provide the currently
recorded value when you use the marker function in online mode. The marker
will be displayed as a little grey triangle in the upper left corner of the diagram.
If you click on the triangle and keep the mouse-button pressed, you can shift a
vertical marker line along the horizontal time axis. The variable defined as
'marker' then will read the corresponding value from the record curve of the
associated project variable.
Do the settings for all variables you want to record. Via button Add a further
line will be added at the end of the list. A line can be deleted by button Delete.
Curve configuration: This button opens the dialog Curve configuration. Here some
settings concerning the trend curves can be done:
Dialog for doing the curve configuration for the trend element