Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 799)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 797
20.9.6 Calling up language-dependent Online Help via a visualization element
The calling of a different Help file with a visualization element can be tied in with the
language currently entered for the visualization. For this purpose, the command
INTERN HELP must be entered for this element in the configuration dialog in category
'Input' at the location 'Execute program', and a [Visu-Helpfiles] section must be
present in the PLC Designer .ini-file. Below this, the corresponding help files must be
assigned to the languages available for selection in the visualization: e.g.:
[Visu-Helpfiles]
German=C:\PROGRAMME\HELP\<hilfedatei_german>.chm
English=C:\PROGRAMME\HELP\<hilfedatei_english>.chm
20.10 Visualization in Online Mode...
Regard the following items concerning a visualization in online mode:
Order of evaluation:
• Dynamically defined element properties (by variables) will overwrite the (static)
base settings defined by options in the configuration dialogs.
• If an element property is defined by a "normal" project variable as well as by the
component of a structure variable (Programmability), then primarily the value of
the project variable will be regarded.
• A visualization can be configured in that way that in online mode it can be
operated solely by inputs via keyboard. This is an important feature especially for
using the visualization with CoDeSys HMI, as Target- or as Web-Visualization.
• Before a download of the project regard the current setting of option 'Prevent
download of visualization files' in the target settings. This concerns all files which
are used in the current visualization. Visualization files are only downloaded for
Target- or Web-Visualization and can be bitmaps, language files and for Web-
Visualization also XML description files.
• The configuration settings for Display, Frame and Language can also be edited in
online mode.
• As long as a visualization "reference" is not configured explicitly, the particular
elements of the reference in online mode will react on inputs like those of the
original visualization ("mother" of the references).
• When you switch the language ('Extras' 'Settings') this will only effect the display
in online mode.
• A visualization can be printed in online mode.