Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 783)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 781
<text prefix="MASCHINE" id="2">
<deutsch>
<![CDATA[ Beschleunigung
]]>
</deutsch>
<english>
<![CDATA[ Acceleration
]]>
</english>
</text>
</text-list>
</dynamic-text>
(5) In the visualization open dialog ‚Settings’, category Language: Activate option
‚Dynamic Texts’; Add file dynamictextsample.xml, now available on your computer, to
the file list.
(6) Go online with the project.
(7) In the visualization settings set language to "deutsch". Set PLC_PRG.ivar to "1" and
PLC_PRG.errnum to "4711". Now in the visualization elements the following texts
should be displayed: "Vorschub" resp. "Fehler an Position 4711". The texts will be
displayed in Arial 13.
(8) Set PLC_PRG.ivar to „2“ and PLC_PRG.errnum to "2000". The texts will change to
"Beschleunigung" and "Das ist ein Fehlertext über mehrere Zeilen“.
(9) In the visualization settings change the language to "english". Now the following
texts will be displayed: "Acceleration" and "This is a error text over more than one
line".