Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 751)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 749
Category Settings for sorting:
Dialog for configuration of an alarm table, category 'Settings for sorting'
Define here according to which criteria the alarm table should be sorted:
Sort column: Sorting according to Priority, Alarm class, Date/Time or Alarm state
Sort order: Ascending or Descending; Example: Ascending according to priority means
that the table will start with alarms of priority 0 (if available), followed by higher
numbered priorities.
Note!
When using in a Target-Visualization this settings are not regarded in the display of
the alarm history. There the sorting always is descending according to the date.