Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 707)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 705
20.6.8 Line width
In the dialog for configuring visualization elements, you can choose the line width for
an element. As predefined options you find width settings from 1 to 5 pixel,
additionally an other value can be entered manually (Other:), or a project variable
(Variable for line width:) can be inserted. For the latter the input assistance ((<F2>)
can be used.
Note!
As soon as the parameter is additionally defined dynamically, i.e. by a structure
variable (see below, category 'Programmability'), the static setting will be
overwritten in online mode.
Dialog Box for Configuring Visualization Elements (Line width category)