Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 50)

L-force | PLC Designer
What is What in PLC Designer
48 DMS 3.2 EN 02/2011 TD29

4.1.12 Data types
Along with the standard data types the user can define his own data types. Structures,
enumeration types and references can be created.
See 'Data Types'.
4.1.13 Visualization
»PLC Designer« provides visualizations so that you can display your project variables.
You can plot geometric elements off-line with the help of the visualization. In Online
mode, these can then change their form/color/text output in response to specified
variable values.
A visualization can be used as a pure operating interface for a PLC with CoDeSys HMI
or as a Web-Visualization or Target-Visualization running via Internet resp. directly on
the PLC.
See for more details: in chapter 'Visualization'.
4.2 Languages...
Supported Languages
»PLC Designer« supports all languages described by the standard IEC-61131:
Textual Languages:
• Instruction List (IL)
• Structured Text (ST)
Grafic Languages:
• Sequential Function Chart (SFC)
• Function Block Diagram (FBD)
• Ladder Diagram (LD)
Additionally there is available - basing on the Function Block Diagram - the grafic
Continuous Function Chart (CFC).