Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 300)

L-force | PLC Designer
Editors in PLC Designer
298 DMS 3.2 EN 02/2011 TD29

'Insert' 'Jump' in FBD
Symbol: Shortcut: <Ctrl>+<L>
This command inserts a jump.
Depending on the selected position (see 'Cursor positions in FBD'), insertion takes
place directly in front of the selected input (Cursor Position 2), directly after the
selected output (Cursor Position 4) or at the end of the network (Cursor Position 6).
For an inserted jump, a selection can be made accompanying the entered text "???",
and the jump can be replaced by the label to which it is to be assigned.
'Insert' 'Return' in FBD
Symbol: Shortcut: <Ctrl>+<R>
This command inserts a RETURN instruction.
Depending on the selected position (see 'Cursor positions in FBD'), insertion takes
place directly in front of the selected input (Cursor Position 2),directly after the
selected output (Cursor Position 4), directly before the selected line cross (Cursor
Position 5), or at the end of the network (Cursor Position 6)
'Insert' 'Box' in FBD
Symbol: Shortcut: <Ctrl>+<B>
With this command, operators, functions, function blocks and programs can be
inserted. First of all, it is always inserted an "AND" operator. This can be converted by
Selection and Overwrite of the type text („AND") into every other operator, into every
function, into every function block and every program. You can select the desired POU
by using Input Assistant (<F2>). If the new selected block has another minimum
number of inputs, these will be attached. If the new block has a smaller highest
number of inputs, the last inputs will be deleted.
In functions and function blocks, the formal names of the in- and outputs are
displayed.
In function blocks there exists an editable instance field above the box. If another
function block that is not known is called by changing the type text, an operator box
with two inputs and the given type is displayed. If the instance field is selected, Input
Assistant can be obtained via <F2> with the categories for variable selection.