Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 200)

L-force | PLC Designer
The Individual Components
198 DMS 3.2 EN 02/2011 TD29

Credentials:
• Insert User name and Password.
• When option Use as default for this project is activated, then the above entered
access data will automatically be used for any further communication between
the actual PLC Designer project and the data base concerning objects of the actual
category.
• Press OK to confirm the settings. The dialog will be closed and automatically the
Login dialog for 'Shared objects' will open. Enter the access data in the same way
as described for the 'Project objects' and confirm with OK. Do the same in the third
Login dialog which will be opened for category 'Compile files'.
• The Login dialog will always open as soon as you try to access the data base before
having logged in successfully like described above.
Note!
If you want to save the access data with the project, activate option 'Save ENI
credentials' in the project options, category 'Load & Save'.
Define
Command: 'Project' 'Data Base Link' 'Define'
Here you can define, whether the object which is currently marked in the Object
organizer should be kept in the data base or just locally in the project. A dialog will
open, where you can choose one of the two data base categories 'Project' or 'Shared
objects', or the category 'Local'.
The icons of all objects which are managed in the data base will be displayed grey-
shaded in the Object organizer. Shared objects are displayed with turquoise letters.
Get Latest Version
Command: 'Project' Data Base Link'Get Latest Version'
The current version of the object which is marked in the Object organizer will be
copied from the data base and will overwrite the local version. In contrast to the Check
Out action the object will not be locked for other users in the data base.