Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 147)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 145
See the listing of all available error messages and warnings.
Example for error messages and compile information in the message window of a project
If the option Save before compilation is selected in the options dialog of the Load &
Save category, the project is stored before compilation.
A object selected in the Object Organizer resp. several objects can be excluded from
compilation by command 'Exclude from build' which is available in the context menu,
resp. via an appropriate configuration ('Exclude objects') in the Options for Build (see
chapter Options for Build).
Note!
Cross references are created during compilation and are stored with the
compilation information. In order to be able to use the command 'Show Call Tree'
resp. to get up to date results with the commands 'Show Cross Reference' and
'Unused Variables', 'Overlapping memory areas', 'Concurrent Access', 'Multiple
Writes to output' ('Project' 'Check' menu), rebuild the project after any change.