Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 540)

L-force | PLC Designer
Command Line-/Command File
538 DMS 3.2 EN 02/2011 TD29

online sourcecodedownload Download of the sourcecode of the project to the PLC ('Online'
'Sourcecode download')
online sim Switch on of simulation mode 'Online' 'Simulation')
online sim off Switch off of simulation mode ('Online' 'Simulation')
Commands of the file menu:
file new A new project is created ('File' 'New')
file open <projectfile>
possible additions:
The project <projectfile> will be loaded ('File' 'Open')
/readpwd:<readpassword> The password for read access is given here so that no dialog asking
for the password will appear when the read-protected project is
opened.
/writepwd:<writepassword> The password for full access is given here, so that no dialog asking
for the password will appear when the project is openend.
file close The current project will be closed ('File' 'Close')
file save The current project will be stored ('File' 'Save')
file saveas <projectfile>
optionally add: <type><version>
The current project will be saved with the file name <projectfile>
('File' 'Save as')
Default: Project will be saved as <projectfile>.pro under the current
PLC Designer version. If you want to save the project as an internal
or external library or as project for an older PLC Designer version,
add the respective command:
Possible entries for <type>:
"internallib" Save as internal library:
"externallib" Save as external library:
"pro" Save as project for older version:
valid entries for <Version>: 15, 20, 21, 22 (product versions 1.5, 2.0,
2.1, 2.2)
Example: "file save as lib_xy internallib22" -> The project "project
xy.pro", which is created in the current PLC Designer Version will be
saved as "lib_xy.lib" for V2.2.
file saveas <projectfile> The current project will be saved with the file name <projectfile>
('File' 'Save as')
file printersetup <filename>.dfr
optionally add: pageperobject or
pagepersubject
Define a document frame file ('File' Printer setup') and optionally
define one of the print options 'New page per object' or 'New page
per subobject' ; these settings affect the printing of the document
(project documentation, see below)
file archive <filename>.zip The project will be archived in a zip-file with the given filename
('File' Save/Mail Archive')
file quit »PLC Designer« will be closed ('File' 'Exit')