Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 405)

L-force | PLC Designer
The Resources

DMS 3.2 EN 02/2011 TD29 403
'Extras' 'Link Docu File'
With this command you can select a document frame.
The dialog box for opening files is opened. Choose the desired document frame and
press OK. Now if you document the entire project, or print parts of your project, then
in the program text there will be an insertion of the comment produced in the
docuframe into all of the variables. This comment only appears in the printout!
To create a document frame, use the 'Extras' 'Make Docuframe File' command.
8.5 Library Manager...
The library manager shows all libraries that are connected with the current project.
The POUs, data types, and global variables of the libraries can be used the same way
as user-defined POUs, data types, and global variables.
The library manager is opened with the 'Window' 'Library Manager' command.
Information concerning included libraries is stored with the project and can be viewed
in the dialog 'Informations about external library'. To open this dialog select the
corresponding library name in the library manager and execute the command 'Extras'
'Properties'.
Libraries created in »PLC Designer« can contain pragma instructions in the declaration
part, which effect that when the library is included in a project, not the complete
declaration part gets displayed. Thus particular variable declarations or comments can
be "concealed" from the user. (see chapter 5.2.3, Pragmas for Controlling the Display
of Library Declaration Parts).
Library Manager