Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 709)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 707
Here can to choose the desired hue from the primary colors and the user-defined
colors. By pressing the Define Colors you can change the user-defined colors.
Depending on the target the dialog might offer only a restricted selection of colors.
This can be reasonable for creating projects which are intended for Target-
Visualizations. In this case the colors are defined via selection lists.
Target specific dialog with restricted color options
20.6.10 Color Variables
Here you can enter project variables (e.g. PLC_PRG.color_inside), which should
determine the particular property in online mode: These property definitions also or
additionally can be programmed with the aid of components of the structure
VisualObjectType. Therefore see the description on the "Programmability" of a
visualization element. There you will find a list of the possible values and their effects.
Note!
The variables, entered in the Color Variables dialog, in online mode will overwrite
the static values given in the 'Color' category as well as corresponding values given
by a structure variable.
In case of multiple definition of an element property consider the specific order of
precedence concerning according to which a value might be overwritten in online
mode by another.