Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 154)

L-force | PLC Designer
The Individual Components
152 DMS 3.2 EN 02/2011 TD29

6.3.18 Translate Project (into another Language)
This command in the 'Project' 'Translate into Another Language' menu opens the
'Translate Project into Another Language' dialog.
Dialog for translating the project into another language
The current project can be translated into another language if an appropriate
translation file is used.
Note!
If you want to save the version of the project in the language in which it was
originally created, save a copy of the project prior to translation under a different
name.
The translation process cannot be undone.
Consider in this context the possibility just to display the project in another
language (in this display version then however not editable).
In the field Translation file, provide the path to the translation file to be used. By
pressing Search you may access the standard Windows file selection dialog.
The field Target language contains a list of the language identifiers entered in the
translation file, from which you can select the desired target language.
OK starts the translation of the current project into the chosen target language with
the help of the specified translation file. During translation, a progress dialog is
displayed, as well as error messages, if any. After translation, the dialog box and all
open editor windows of the project are closed.