Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 140)

L-force | PLC Designer
The Individual Components
138 DMS 3.2 EN 02/2011 TD29

The dialog Details will open with a list of available files.
Dialog box for detailed selection of files for the Archive ZIP
The dialog shows a list of all files which are available for the category: Automatically
alle files are selected, an exception is category 'Target Files' where only the files are
selected which are relevant for the currently set target system. For modifying the
selection activate resp. deactivate the desired files. With the button Select All all files
of the list are selected, with Select None none of them. A single file can be
selected/deselected by a mouseclick in the checkbox, also by a doubleclick on the list
entry or by pressing the spacebar when the list entry is marked.
Close the Details dialog with Save to store the new settings.
In the main dialog the checkbox of categories, for which not all files are selected, will
appear with a grey background color .
The following file categories are available, the right column of the table shows which
files can be added to the zip file:
Category Files
Project File projectname.pro (the PLC Designer project file)
Referenced Libraries *.lib, *.obj, *.hex (libraries and if available the corresponding object and
hex-files)
Compile Information *.ci (compile information),
*.ri (download/reference information)
<temp>.* (temporary compile and download files)
also for simulation
INI File plcdesigner.ini
Log File *.log (project log file)