Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 414)

L-force | PLC Designer
The Resources
412 DMS 3.2 EN 02/2011 TD29

A task name or program name can also get edited in the configuration tree. For this
perform a mouseclick on the name or select the entry and press the <Space> button to
open an edit frame.
You can use the arrow keys to select the previous or next entry in the configuration
tree.
By clicking on the task or program name, or by pressing the <Space bar>, you can set
an edit control box around the name. Then you can change the designation directly in
the task editor.
'Insert' 'Insert Task' or 'Insert' 'Append Task'
With this command you can insert a new task into the Task Configuration. The entries
each consist of a symbol and the task name.
If a task or the entry 'System events' is selected, then the 'Insert Task' command will
be at your disposal. The new task will be inserted after the selected one. If the entry
'Task Configuration' is selected, then the 'Append Task' is available, and the new task
will be appended to the end of the existing list. The maximum number of tasks is
defined by the target system. Please regard that a certain number of tasks already
might be reserved for modules of the PLC Configuration (defined in the cfg-file).
When inserting a task, the dialog for setting the Task attributes will be opened:
Dialog Box for Setting Task Attributes