Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 138)

L-force | PLC Designer
The Individual Components
136 DMS 3.2 EN 02/2011 TD29

If an encrypted project should be opened resp. if an encrypted library should be used
in a project, the dialog asking for the key will appear.
Dialog for entering the key
Licensing a library:
If you want save the project as a licensed library, you can add the appropriate licensing
information in the dialog 'Edit Licensing Information'. Open the dialog by pressing the
button Edit license info.... See for a description in 'License Management in »PLC
Designer«'.
After having done all settings, press OK. The current project will be saved in the
indicated file. If the new file name already exists, then you are asked if you want to
overwrite this file.
When saving as a library, the entire project is compiled. If an error occurs thereby, then
you are told that a correct project is necessary in order to create a library. The project
is then not saved as a library.
6.3.7 'File' 'Save/Mail Archive'
This command is used to set up and create a project archive file. All files which are
referenced by and used with a PLC Designer project can be packed in a compressed zip
file. The zip file can be stored or directly can be sent in an email. This is useful if you
want to give forward a set of all project relevant files.
Note!
The archive function is not practical for restoring a project environment. It is
designated for an easy packing of all files belonging to a project. When unpacking
an archive the paths of the particular files must be adapted to the actual PLC
Designer environment !