Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 211)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 209
6.5.7 'Edit' 'Find'
Symbol:
With this command you search for a certain text passage in the current editor
window. The Find dialog box opens. It remains opens until the button Cancel is
pressed.
In the field Find what you can enter the series of characters you are looking for.
In addition, you can decide whether the text you are looking for Match whole word
only or not, or also whether Match case is to be considered, and whether the search
should proceed Up or Down starting from the current cursor position.
The button Find next starts the search which begins at the selected position and
continues in the chosen search direction. If the text passages is found, then it is
highlighted. If the passage is not found, then a message announces this. The search
can be repeated several times in succession until the beginning or the end of the
contents of the editor window has been reached. In the CFC editor the geometrical
order of the elements will be regarded, the search will run from the left upper corner
of the window to the right upper corner. Please regard that FBD POUs are processed
from the right to the left !
Find dialog box
6.5.8 'Edit' 'Find next'
Symbol: Shortcut: <F3>
With this command you execute a search with the same parameters as with the most
recent action 'Edit' 'Find'. Please regard that FBD POUs are processed from the right to
the left !