Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 149)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 147
6.3.15 'Project' 'Translate into another language'
This menu item is used for translating the current project file into another language.
This is carried out by reading in a translation file that was generated from the project
and externally enhanced in the desired national language with the help of a text
editor. The project can be just displayed or really get translated into one of the
generated language versions.
The following menu sub-items are present:
• Create translation file
• Translate project
• Show project translated
• Toggle translation
• See also: 'Editing of the translation file'
6.3.16 Create translation file
This command in the 'Project' 'Translate into another language' menu leads to the
'Create translation file' dialog.
Dialog for creating a translation file
In the Translation file field, enter a path that shows where the file is to be stored. The
default file extension is *.tlt; this is a text file. You also can use the extension *.txt,
which is recommended, if you want to work on the file in EXCEL or WORD, because in
this case the data are organized in table format.