Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 744)

L-force | PLC Designer
PLC Designer Visualization
742 DMS 3.2 EN 02/2011 TD29

Color areas: This button opens the dialog Configure color areas : Here you can define a
separate color for each partition of the scale.
Dialog for the configuration of color areas for a Meter
Begin of area, End of area: Insert here the start and end values of the scale partition
which should get the color defined in the following:
Color selection: This button opens the standard dialog for choosing a color or a target-
specific selection list. Confirm your selection with OK, which will close the dialog, and
press button Add, whereupon the color and the assigned partition of the scale will be
added to the window 'Active areas'. In order to remove an already defined area, select
the entry and press Delete.
If the option Durable color areas is activated, the defined color ranges will be
displayed permanently, otherwise in online mode just that partition of the scale will
be colored which contains the current value of the respective value.
Label: Depending on which of the options is activated (inside or outside), the scale
labels are placed at the inside or the outside of the circular arc of the scale.