Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 128)

L-force | PLC Designer
The Individual Components
126 DMS 3.2 EN 02/2011 TD29

ENI-Connection
TCP/IP-Address: Address of the computer where the ENI-Server is running
Port: Default: 80; must be the same as set in the configuration parameters of the
ENI Server
Project name: Name of the data base folder where the objects of this category should be
stored. Press button ... to open a folder tree of the already existing data base
projects. If the desired folder already exists, you can select it in this tree and
it will be entered in the 'Project name' edit field. If you had not logged in to
the ENI Server until you try to open the folder tree by button ..., then you will
first get the Login dialog where you must enter 'User name' and 'Password' as
defined in your ENI user account to get access to the three data base
categories.
Read only If this option is activated, then only read access is possible to the above
defined data base folder.
Get latest Version
The data base function 'Get latest Version' (Menu 'Project' 'Data Base Link' copies the
actual version of POUs from the above defined data base folder to the currently
opened project, whereby the local version of objects will be overwritten. This will be
done automatically for all objects, for which the version found in the data base differs
from that in the project, as soon as one of the chosen timing conditions will meet.
Choose the options by setting a check mark:
At Project Open As soon as the project is opened in »PLC Designer«
Immediately after Changes in ENI As soon as a newer version of the POU is checked in
to the data base (e.g. by another user); then the
POU will be updated in the current project
immediately and an appropriate message will pop
up.
Before any Compile Before any compile process in »PLC Designer«
Check out
The data base function 'Check out' means that the POU will be marked as 'in the
works' and will be locked for other users until it will be de-blocked again by a 'Check in'
or 'Undo check out'.
If the option Immediately at start of editing is activated, then an object will be
checked out automatically as soon as you start to edit it. If the object is currently
already checked out by another user (indicated by a red cross before the object name
in the PLC Designer object organizer), then a message will pop up.