Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 789)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 787
For creating a special language file *.vis for the visualization, perform the following
steps:
In order to set up a new *.vis language file for the visualization, proceed as follows:
Open likewise the Settings Visualization dialog, Language category.
Choose option language file. In the associate input field enter where you want to
store the file. The extension is .vis. You also can use the dialog 'Open file' by
pressing the button
. If a language file with the extension .vis is already
present, it will be offered to you here.
In the input field next to Language you fill in a keyword for the language which is
currently used in the visualization, i.e."german" (or "D"). then press the button
Save. A file with the extension .vis will be created, which now can be edited by a
normal text editor. For example you can open the file by NOTEPAD. See here an
example file:
You get a list of the text variables for the language currently used in the
visualization. It includes a reference to the title of this list, for example
"1=german" as reference to the title [german]. You can extend the list by copying
all lines, then replacing the German by English text and setting a new title
[english]. Beyond the line 1=german you accordingly have to add 2=english.
To view the visualization in one of the prepared languages, open the dialog
Language again. In the option field beyond Language now you can choose
between german and english (for the example described above).