Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 411)

L-force | PLC Designer
The Resources

DMS 3.2 EN 02/2011 TD29 409
Save… This menu item can only be selected if the project log is currently displayed. It
allows an excerpt of the project log to be stored in an external file. For that, the
following dialog will be displayed, in which the Online sessions to be stored can be
selected:
After successful selection, the standard dialog for storing a file opens ('Save Log').
Display Project Log This command can only be selected if an external log is currently
displayed. It switches the display back to the project log.
8.6.3 Storing the project log
Regardless of whether or not the log is stored in an external file (see above), the
project log is automatically stored in a binary file entitled <projectname>.log. If a
different path is not explicitly given in the 'Project' 'Options' 'Log' dialog, the file is
stored in the same directory as that in which the project is stored.
The maximum number of Online sessions to be stored can be entered in the 'Project'
'Options' 'Log' dialog. If this number is exceeded during recording, the oldest session is
deleted to make room for the newest one.