Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 624)

L-force | PLC Designer
Compiler Errors and Warnings
622 DMS 3.2 EN 02/2011 TD29

4357
"IEC-Library not found"
Check whether the library iecsfc.lib is inserted in the library manager and whether the
library paths defined in ‘Project’ ‘Options’ ‘Paths’are correct.
4358
"Action not declared: '<name>'"
Make sure that in the object organizer the action of the IEC step is inserted below the
SFC POU and that in the editor the action name is inserted in the box on the right
hand of the qualifier.
4359
"Invalid Qualifier: '<name>'"
In the box on the left hand of the action name enter a qualifier for the IEC action.
4360
"Time Constant expected after qualifier '<name>'"
Enter next to the box on the left hand of the action name a time constant behind the
qualifier.
4361
"'<name>' is not the name of an action"
Enter next to the box on the right hand of the qualifier the name of an action or the
name of a variable which is defined in the project.
4362
"Nonboolean expression used in action: '<name>'"
Insert a boolean variable or a valid action name.
4363
"IEC-Step name already used for variable: '<Name>'"
Please rename the step or the variable.