Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 232)

L-force | PLC Designer
The Individual Components
230 DMS 3.2 EN 02/2011 TD29

6.6.18 'Online' 'Write/Force' Dialog'
Shortcut: <Ctrl>+<Shift>+<F7>
This command leads to a dialog which displays in two registers the current writelist
(Watchlist) and forcelist (Forcelist). Each variable name and the value to be written to
it or forced on it are displayed in a table.
Dialog for editing the writelist and the forcelist
The variables reach the watchlist via the commands 'Online' 'Write Values' and are
transferred to the forcelist by the command 'Online' 'Force Values'. The values can be
edited here in the „Prepared Value" or „Forced Value" columns by clicking the mouse
on an entry to open an editor field. If the entry is not type-consistent, an error
message is displayed. If a value is deleted, it means that the entry is deleted from the
writelist or the variable is noticed for suspension of forcing as soon as the dialog is
closed with any other command than Cancel.