Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 248)

L-force | PLC Designer
Editors in PLC Designer
246 DMS 3.2 EN 02/2011 TD29

Example in FBD for a network comment and for a comment placed behind an input
variable:
In KOP a comment also can be added to each contact resp. each coil, if this is
configured accordingly in the display options in menu 'Extras' 'Options'.
• In the Ladder Editor additionally a comment for each particular contact and coil
can be added, if the corresponding options are activated in the menu 'Extras'
'Options'.
• In CFC there are special comment POUs which can be placed at will.
• In SFC, you can enter comments about a step in the dialog for editing step
attributes.
Nested comments are also allowed if the appropriate option in the 'Project' 'Options'
'Build Options' dialog is activated.
In Online mode, if you rest the mouse cursor for a short time on a variable, the type
and if applicable the address and comment of that variable are displayed in a tooltip.
7.1.4 Zoom to POU
Shortcut: <Alt>+<Enter>
With this command a selected POU is loaded into its editor. The command is available
in the context menu (<F2>) or in the 'Extras' menu, if the cursor is positioned on the
name of a POU in a text editor or if the POU box is selected in a graphic editor.
If you are dealing with a POU from a library, then the library manager is called up, and
the corresponding POU is displayed.
7.1.5 Open instance
This command corresponds to the 'Project' 'Open instance' command.
It is available in the context menu (<F2>) or in the 'Extras' menu, if the cursor is
positioned on the name of a function block in a text editor or if the function block box
is selected in a graphic editor.