Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 448)

L-force | PLC Designer
The Resources
446 DMS 3.2 EN 02/2011 TD29

'Extras' 'Trace Configuration'
With this command you will be given the dialog box for entering the variables to be
traced, as well as diverse trace parameters for the Sampling Trace. The dialog can also
be opened by a double click in the grey area of the dialog Sampling Trace.
Dialog Box for Trace Configuration
First define a name for the trace configuration (Trace Name). This name will be added
to the selection list 'Trace' in the upper right corner of the Trace window, as soon as
you have confirmed and closed the configuration dialog with OK. Optionally enter a
comment.