Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 695)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 693
20.6 Visualization Elements, Configure...
In the configuration dialogs opened via the 'Extras' 'Configure' command the
properties of an element or object are set either by activating options or dynamically
by inserting project variables. Besides that the properties can be programmed via the
components of a structure variable, which can be defined for each visualization
element.
Note!
Regard the order of analysis, which will be followed in online mode:
The values which are given dynamically, i.e. via project variables, will overwrite the
fix parameters defined for the same property.
If an element property is defined by a "normal" project variable as well as by the
component of a structure variable, then in online mode primarily the value of the
project variable will be regarded.
Please regard the possibility of using Placeholders as well as the special input
possibilities which are useful if the visualization should be used in CoDeSys HMI resp.
as Target or Web-visualization , that means if the visualization serves as the only user
interface for a PLC program (see also: INTERN in category 'Input' of the configuration
dialogs, Keyboard usage).

Stop!
Dialogs which include the configuration of Colors and Fonts for a visualization
element, can look differently depending on the currently selected target system.
Possibly instead of the standard dialog there is a dialog with restricted options. This
might be reasonable for projects, which are designated for a use in Target-
Visualizations. See also: Colors resp. Text.
Also regard that in the project options a separate directory can be defined for
visualization files.