Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 24)

L-force | PLC Designer
About this Documentation
22 DMS 3.2 EN 02/2011 TD29

1.1 Liability
All information given in this documentation has been selected carefully and tested for
compliance with the hardware and software described. Nevertheless, discrepancies
cannot be completely ruled out. We do not accept any responsibility or liability for any
damage that may occur. Required corrections will be included in updates of this
documentation.
This documentation is based on the original »CoDeSys« documentation by the
company 3S - Smart Software Solutions GmbH (Kempten). The screenshots shown
may deviate from the »PLC Designer« representation.
1.2 Trademarks
Microsoft, Windows and Windows NT are either registered trademarks or trademarks
of Microsoft Corporation in the U.S.A. and/or other countries.
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems
Incorporated in the U.S.A. and/or other countries.
All other product names contained in this online documentation are trademarks of
the corresponding owners.