Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 129)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 127
Check in
The data base function 'Check in' means, that a new version of the object will be
created in the data base. The older versions will be kept anyway.
You can activate one or both of the following options to define the time of automatic
Checking in:
At Project Save as soon as the project is saved
After successfull compile as soon as the project has been compiled without
errors
For each of the options 'Get last version', 'Check out' and 'Check in' additionally the
option with Query can be activated. In this case, before the corresponding action is
carried out, a dialog opens where you still can decide to cancel the action or otherwise
confirm it.
The items of the dialog 'Shared objects' are the same like in the dialog 'Project objects'
described above. The settings apply to all objects which are assigned to the data base
category 'Shared objects'.
If you do a primary configuration, the configuration dialogs will appear one after the
other and you will be guided by a wizard (button Next). The settings made in the first
dialog will automatically be inherited to the other ones. So those just have to be
edited if modifications are necessary.
Cancel will close the dialog without saving the done modifications in the currently
opened dialog. You return to the main dialog 'Options' 'Project source control'.
If an already existing configuration has been modified, then the new settings (for all
three dialogs) can be saved by pressing OK. After that the dialog will be closed and you
return to the main dialog 'Options' 'Project source control'.
Note!
The settings will be stored in the project.