Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 166)

L-force | PLC Designer
The Individual Components
164 DMS 3.2 EN 02/2011 TD29

6.3.33 'Extras' 'Accept properties'
This command is available in the compare mode (see above 'Project' 'Compare').
The object properties for the POU, where the cursor is currently placed, will be
accepted for the actual project as they are set in the reference version.
Note!
The acceptance of different project parts (differences) or access right properties is
only possible from the reference project of the actual project, not vice versa.
6.3.34 'Extras' 'Accept access rights'
This command is available in the compare mode only in project overview: (see above
'Project' 'Compare').
The object access rights for the POU, where the cursor is currently placed, will be
accepted for the actual project as they are set in the reference version .
6.3.35 'Project' 'Merge'
With this command you can merge objects (POUs, data types, visualizations, and
resources) as well as links to libraries from other projects into your project.
When the command has been given, first the standard dialog box for opening files
appears. When you have chosen a file there, a dialog box appears in which you can
choose the desired object. The selection takes place as described with 'Project'
'Document' .
If an object with the same name already exists in the project, then the name of the
new object receives the addition of an underline and a digit ("_1", "_2" ...).