Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 212)

L-force | PLC Designer
The Individual Components
210 DMS 3.2 EN 02/2011 TD29

6.5.9 'Edit' 'Replace'
With this command you search for a certain passage just as with the command 'Edit'
'Find', and replace it with another. After you have chosen the command the dialog box
for find and replace appears. This dialog box remains open until the button Cancel or
Close is pressed.
In the field behind Find automatically that string will be inserted which you have
marked before in the editor. You also can enter the search string manually. Pressing
button Replace will replace the current selection with the string which is given in the
field Replace with. Use the button Find Next to get to the next passage where the
string is found. Please regard, that FBD POUs are processed from the right to the left !
The button Replace all replaces every occurrence of the text in the field Find next after
the current position with the text in the field Replace with. At the end of the
procedure a message announces how many replacements were made.
Dialog box for find and replace