Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 209)

L-force | PLC Designer
The Individual Components

DMS 3.2 EN 02/2011 TD29 207
6.5.4 'Edit' 'Copy'
Symbol: Shortcut: <Ctrl>+<C>
This command copies the current selection from the editor to the clipboard. This does
not change the contents of the editor window.
With the Object Organizer this similarly applies to the selected object, whereby not all
objects can be copied, e.g. the PLC Configuration.
Remember that not all editors support copying and that it can be limited with some
editors.
For the type of selection the same rules apply as with 'Edit' 'Cut'.
The form of the selection depends upon the respective editor:
• In the text editors (IL, ST, and declarations) the selection is a list of characters.
• In the FBD and LD editors the choice is a number of networks which are indicated
by a dotted rectangle in the network number field or a box with all preceding lines,
boxes, and operands.
• In the SFC editor the selection is a part of a series of steps surrounded by a dotted
rectangle.
• In order to paste the content of the clipboard you use the command 'Edit' 'Paste'. In
the SFC editor you can also use the commands 'Extras' 'Insert parallel branch
(right)' or 'Extras' 'Paste after'.
• In order to delete a selected area and simultaneously put it on the clipboard, use
the command 'Edit' 'Cut'.
6.5.5 'Edit' 'Paste'
Symbol: Shortcut: <Ctrl>+<V>
Pastes the content of the clipboard onto the current position in the editor window. In
the graphic editors the command can only be executed when a correct structure
results from the insertion.
With the Object Organizer the object is pasted from the clipboard.
Remember that pasting is not supported by all editors and that its use can be limited
in some editors.