LSC Lighting CLARITY LX Series v.1 - Manual (Page 149)

Clarity Proglets
Operator Manual
Page 139
 To deselect all selected fixtures in all type tabs click None in the Programmer
Toolbar. Keyboard shortcut = [Space-bar]
 To clear all programmers and deselect all fixtures click Clear All twice.
21.4.4 Selection Order
The order in which you select the fixtures is used for certain effects (such as fans and
dynamics) and can be also utilized by the sort function described below. Selection order can be
saved in a group (see below).
21.4.5 Attribute Quick Menus
As an aid to quick programming, the name of each Attribute Control can be clicked or the
Attribute Control area itself right-clicked to access the Attribute Control Quick Menus. These
menus provide rapid access to common settings. Each individual Attribute Control has its own
specific quick menu, offering functions relevant to that attribute. For example:
Typical Attribute Quick Menu for Gobo
21.4.6 Programmer Toolbar Fixture Buttons
Programmer toolbar fixture selection buttons
The All button on the Programmer Toolbar has multiple functions:
 If Next or Prev has been used to control individual fixtures from a selection of fixtures,
clicking All restores control of all selected fixtures. See “Individual Fixture Control”
below for more details.
 If any fixtures have attributes grabbed in the current programmer session, clicking All
will select all of those fixtures. Further clicks of All will cycle between selecting all
patched fixtures and selecting programmer contents.
 If the current programmer is empty, clicking All will select all patched fixtures.
21.5 INDIVIDUAL FIXTURE CONTROL
When more than one fixture is selected, you can use the Programmer Toolbar buttons (or the
Prev and Next buttons above the Encoder wheels on LX consoles to refine your control to an
individual fixture whilst still maintaining your multiple selections.
Programmer Toolbar