LSC Lighting CLARITY LX Series v.1 - Manual (Page 71)

Clarity LX Console Controls
Operator Manual
Page 61
8.7.7 Playback Controls
  (Go): Plays the next cue in the cue-list or restarts a paused fade. Pressing  will
start the fade to the next cue even if the current fade has not finished.
Press Function+  to snap to the next cue.
o The indicator in the button lights during the transition to the next cue.
If the playback contains a chase, pressing  will start the chase. If you continue tapping  (to
the beat of the music) it will automatically adjust the chase speed to the beat.

II I (Pause). Pauses any fades in progress. If no fades are in progress, if fades back to
the previous step.
o The indicator in the button lights when the fade to the next cue has completed.
o The indicator in the button flashes if the cue has been partially overridden.
If the playback contains a chase, pressing II I will stop the chase. If you continue tapping II I
it will manually step the chase with each tap.
 Function + II I. Snap to the previous cue.
 Function + . Snap to the next cue.
 Select. Connects that playback to the main  play button and main II I (Pause/Back)
button. Also used to select a playback when editing or using the “Update” function. See
section 26.2 for details on Update.
 Flash. The Flash button instantly flashes the intensity of all fixtures on the playback to
full level. The Flash button can also be used to “Solo” the playback. See section 25.2 for
details on “Solo” and “Solo Safe”.
The Main Go and Main II I (Pause/Back) buttons control the currently selected playback (see
above). The currently selected playback has its name displayed in reverse video (white text on
a black background) on the touch screen.
8.7.8 Playback Touch Screens
Each screen shows the name of the assigned cue-list. Cue-lists that have been configured as a
chase have their name displayed in italics. The vertical yellow line shows the division between
left (green bar) and right (blue bar) pages (see below).
8.7.9 Assign or Clear a Playback
To assign a cue-list or chase to a playback, double tap anywhere on an empty playback’s touch
screen. The Playbacks window opens on the touch screen. In the “Assign” tab, the “Cue-lists”
tab at the bottom of the window shows all of the available cue-lists and chases.
Selected
Playback
Page
Divider
Clear
Playback
Cue-lists
tab