1 usb indicator, 2 dmx indicators, 3 desklamp – LSC Lighting CLARITY LX Series v.1 User Manual

Page 20: 4 kensington lock slot, 5 usb slot, 11 starting clarity, 12 loading a show

Advertising
background image

Desktop Clarity

Clarity

Operator Manual

Page 10



VX20 Rear Panel

3.10.1 USB Indicator

The LED beside the USB connector shows the status:

Flashing RED = No USB connected. (The DBO button also flashes)

Steady RED = USB connected but Clarity not running on computer.

Green = USB data is OK.

3.10.2 DMX Indicators

The LED beside each DMX connector shows the status:

Green = DMX data is OK.

3.10.3 Desklamp

The Desklamp socket provides 12volts power for a LED. Pins 1 and 2 are ground and pin 3 is +12
Volts. The brightness control is accessed by holding down Function and Select together.

3.10.4 Kensington Lock Slot

The Kensington Lock slot allows you to secure your VX10 or VX20 wing using a commercially

available tethering device.

3.10.5 USB Slot

The top panel of the VX10 and VX20 wings has a standard USB connector allowing you to connect
other USB devices such as memory devices to store your shows.

Multiple VX10 and VX20 wings can be connected to your computer.

Note: The QX and VX products are designed to be powered from the USB port on our computer.
However due to the design of some computers or your particular configuration, there may not be

enough power to operate the VX products. If you experience problems in the installation process,
first try a different USB port on your computer or try powering the VX10 with an external power

supply or if you have a VX20, plug it into the mains supply. If you still experience problems,
check the LSC website or contact your local dealer.

Note that the DMX output has to be patched in Clarity before it will work. See section 11.12 for
details.

3.11 STARTING CLARITY
If you are running a purchased copy of Clarity, please ensure that your USB license dongle is

plugged into a USB port on the PC or in the secure rear port your VX10 or VX20 wing before you
start Clarity.

To start Clarity, double click on the Clarity icon on your desktop or browse to the LSC menu from
your Start button.

3.12 LOADING A SHOW
When you start Clarity, it prompts you to load a show.

4 DMX Universe Outputs

LED Desk

Lamp Socket

Mains Input

USB to

Computer

Remote Trigger

Inputs

MIDI In

MIDI Out

USB dongle

compartment

Kensington

Lock slot

USB Indicator

DMX Indicator

Advertising
This manual is related to the following products: