LSC Lighting CLARITY LX Series v.1 - Manual (Page 171)

Clarity Record
Operator Manual
Page 161
24 Record
24.1 OVERVIEW
The looks that you create with the programmer can be recorded into Cue-lists for later
playback. A cue-list can contain any quantity of individual cues. The transition from one cue to
the next in the list can be set to be either manually started or automatically started at the
completion of the previous cue. Each cue can have its own in and out delay and fade times. A
cue-list can be set to automatically chase through the cues at a set rate. Chases can be
synchronized to a common tempo (Metronome) or to a tapped beat that you enter.
The cues that you record can also include dynamics (real time effects). They might also contain
values that you have created for Matrices (LED arrays) or Media Servers. Times, Dynamics,
Matrices and Media Servers are all described in their relevant sections.
24.2 RECORDING A CUE
There are many options to consider when recording a cue. These options control exactly what is
recorded in each cue and its suitability to different modes of playback.
When you have selected and programmed your fixtures for the desired look you press Record.
The Record Cue dialog box appears:
Record New Cue-list
The tabs on the top left allow you to choose to record a New Cue-list or to add a cue to an
Existing Cue-list or a Selected Cue-list.
24.2.1 New Cue-list
To create a new cue-list and record the first cue select the New Cue-list tab.
To accept the default settings and record the first cue press Record.
The default settings are:
 Cue-list name = New Cue-list
 Playback Mode = Tracking
 Cue name = Cue
 Fade in = 0 seconds