LSC Lighting CLARITY LX Series v.1 User Manual
Page 2
DISCLAIMER
Both LSC Lighting Systems (Aust) Pty. Ltd. and OpenClear Pty. Ltd. have a corporate policy of
continuous improvement, covering areas such as product design and documentation. To achieve this
goal, we undertake to release software updates for all products on a regular basis. In light of this
policy, some detail contained in this manual may not match the exact operation of your product.
Information contained in this manual is subject to change without notice.
In any event, neither LSC Lighting Systems (Aust) Pty. Ltd. nor OpenClear Pty. Ltd. can be held
liable for any direct, indirect, special, incidental, or consequential damages or loss whatsoever
(including, without limitation, damages for loss of profits, business interruption, or other pecuniary
loss) arising out the use or the inability to use this product for its intended purpose as expressed by
the manufacturer and in conjunction with this operating manual.
Servicing of this product is recommended to be carried out by LSC Lighting Systems (Aust) Pty. Ltd.
or its authorized service agents. No liability will be accepted whatsoever for any loss or damage
caused by service, maintenance or repair by unauthorized personnel.
In addition servicing by unauthorized personnel may void your warranty.
LSC Lighting Systems’ products must only be used for the purpose for which they were intended.
Clarity LX products are manufactured in Australia.